|
| |
|
|
Control of gas microturbine equipped with waste heat recovery system
Kijanica, Michael ; Konečná, Eva (referee) ; Máša, Vítězslav (advisor)
This bachelor’s thesis deals with control of the cogeneration system which utilizes waste heat from gas microturbine. This complex cogeneration system was created in Laboratory of Energy Intensive Processes NETME Centre and its main purpose is the research in utilization of high temperature flue gas from Capstone C30 microturbine for drying laundry. In case of implementation of similar cogeneration system in industrial or commercial laundries, it is necessary to design automatic control of such system to make laundry - operations easier, minimizing energy waste and maximizing safety.
|
|
|
Automatic process control of aftercooling in brickkiln
Cacek, Jan ; Ošmera, Pavel (referee) ; Němec, Zdeněk (advisor)
The thesis deals with the design of the multivariable automatic control system of aftercooling process in the brick industry tunnel kiln. Theoretical part submits the facilities of controlled systems identification and the design methods of uni and multi variable systems. In the practical section is cleared up the principal of the aftercooling process and its identification based on the measured data. The output of the thesis is the design and the analysis of multivariable system with the conservation of the control circuit autonomy.
|
|
|
Sacristian bell operation control by programmable logic controller
Křížek, Ladislav ; Marada, Tomáš (referee) ; Němec, Zdeněk (advisor)
The bell is described, its parts and constructive suppositions for the right function in this work, sacristian bell operation control with hand-working and with the rotating electromotor. Programmable logic controller machine SIEMENS Simatic S7-200 CPU 221 is also described, which is the part of ringing machine in Bukovinka’s church. This ringing machine and especially the mode of both bells have specific defect. According to owner´s wishes and instructions were two variants prepared for this ringing machine to improve the working of couple bells. One of these variants was tested and just tuned at the ringing machine. This one variant follows the owner´s wish, works in Bukovinka´s church till now.
|
|
|
Batch control of the barman machine
Slavinský, Vojtěch ; Knobloch, Tomáš (referee) ; Štohl, Radek (advisor)
This thesis deals with research on Batch Control and ISA95 standard. It also deals with the supplied robot with the work name Barman. The thesis describes its real state in terms of hardware and software. Subsequently, the thesis describes the design of Barman control according to standards for Batch Control. The implementation of this proposal is the content of the second part of this work.
|
|
|
Altitude Control of Quadrotor UAV
Hamáček, Vojtěch ; Chromý, Adam (referee) ; Gábrlík, Petr (advisor)
The aim of the bachelor thesis is to design and implement remote control and stabilization of altitude of own quadrotor. The work is first focused to realization of the quadrotor remote control. Subsequently, a brief summary of flight height sensors and possible ways to evaluate them. The practical implementation of the altitude evaluation is presented, followed by a brief summary of the possibilities of stabilization of the altitude and the implementation of the real controller, followed by real testing. The conclusion of the thesis contains a summary of the problem solved and the results achieved in real test.
|
|
|
SCADA/HMI systems in process control
Sobotka, Lubomír ; Máša, Vítězslav (referee) ; Chlápek, Petr (advisor)
The aim of the bachelor thesis is to make sommary basic principles of automatic control in process and power industry and describe chosen software, which is used in process and power industry. This thesis describes basic problems of automatic control and is engaged in theory of making vizualization screen and software know as SCADA/HMI.
|
|
|
Control of gas microturbine equipped with waste heat recovery system
Kijanica, Michael ; Konečná, Eva (referee) ; Máša, Vítězslav (advisor)
This bachelor’s thesis deals with control of the cogeneration system which utilizes waste heat from gas microturbine. This complex cogeneration system was created in Laboratory of Energy Intensive Processes NETME Centre and its main purpose is the research in utilization of high temperature flue gas from Capstone C30 microturbine for drying laundry. In case of implementation of similar cogeneration system in industrial or commercial laundries, it is necessary to design automatic control of such system to make laundry - operations easier, minimizing energy waste and maximizing safety.
|
|
|
Batch control of the barman machine
Slavinský, Vojtěch ; Knobloch, Tomáš (referee) ; Štohl, Radek (advisor)
This thesis deals with research on Batch Control and ISA95 standard. It also deals with the supplied robot with the work name Barman. The thesis describes its real state in terms of hardware and software. Subsequently, the thesis describes the design of Barman control according to standards for Batch Control. The implementation of this proposal is the content of the second part of this work.
|
|
|
Altitude Control of Quadrotor UAV
Hamáček, Vojtěch ; Chromý, Adam (referee) ; Gábrlík, Petr (advisor)
The aim of the bachelor thesis is to design and implement remote control and stabilization of altitude of own quadrotor. The work is first focused to realization of the quadrotor remote control. Subsequently, a brief summary of flight height sensors and possible ways to evaluate them. The practical implementation of the altitude evaluation is presented, followed by a brief summary of the possibilities of stabilization of the altitude and the implementation of the real controller, followed by real testing. The conclusion of the thesis contains a summary of the problem solved and the results achieved in real test.
|
guest ::
